Learn How To Reset A Check Engine Light

If your check engine light stays on even after you have resolved the issue, you’ll want to learn how to reset and turn off a check engine light. Calgary-area drivers will find that the process is really quite easy and can be performed in your own driveway. This guide from the experts in the Service Centre at Capital Chevrolet Buick GMC will provide you with a simple trick to turn off the check engine light on your car, truck, or SUV.

Why Is My Check Engine Light On?

First of all, you need to find an answer to the question, “Why is my check engine light on?” It is important that you make sure that you have taken care of whatever it is that triggered the check engine light before you attempt to reset it. Often the problem can be a minor one, such as not having the gas cap securely fastened. Whatever caused the light to come on needs to be attended to, as even small problems can become major issues if they are not resolved. If you are unable to locate the initial problem, we strongly recommend that you schedule service with us as soon as possible. Our GM Certified technicians can quickly identify the issue and get you safely back on Lake Bonavista-area roads.

How to Turn Off the Check Engine Light

If you are certain that you have taken care of the problem that triggered the check engine light, you can use this simple trick to turn off the check engine light. If you are uncomfortable with performing this task, the service team at Capital Chevrolet Buick GMC can take care of it for you. The following steps describe how to turn off a check engine light:

  • Turn off the ignition and put on safety glasses and gloves.
  • Locate the negative terminal on your car battery. It will most often have a black cap and a negative (-) symbol. The positive cap is red and will have a positive (+) symbol.
  • Loosen the nut on the negative terminal with a wrench and pull the negative connector from the battery. Keep it to the side for 30 – 60 seconds.
  • Reconnect the negative cable and tighten it with your wrench.

That’s all you need to do. If you see that the check engine light stays on even after you’ve disconnected/reconnected the battery, bring your vehicle to our Service Centre. Please note that whenever you disconnect or jump start your battery, you may also need to reset the infotainment system in your vehicle.

Check Your Gas Cap

As previously mentioned, one of the most common reasons that the check engine light turns on is a loose or cracked gas cap. Usually, removing the gas cap and reseating it, making sure that it is properly secured, will cause the light to turn off. If the engine light stays on after you perform this check, follow the steps above to reset and turn off the check engine. If you run into any problems, our service professionals will be happy to assist you.

The Capital Chevrolet Buick GMC Service Centre Is Here for You

Whether you need help learning how to reset and turn off your check engine light or if your vehicle is due for its next oil change or tire rotation, you can count on the experts at Capital Chevrolet Buick GMC. We even offer rotating service specials and coupons to make taking care of your car, truck, or SUV more affordable for drivers from Canyon Meadows and beyond. Please feel free to contact our Service Centre if you have any questions.

Capital Chevrolet Buick GMC 50.935676, -114.067161.